ONE TWO THREE: Four! Truth be told, for a bunch of headlight nerds: We could not imagine a more perfect projector. The all-new Morimoto Mini D2S 4.0 Bi-xenon takes the cake in every category. A supreme low beam. A High beam so bright it's unholy. A cutoff line that can't get any sharper. Quality that nobody can question, and an undeniable ease of installation. If we died and went to headlight heaven, this thing would be greeting us at the gate.
LEGENDARY: When Morimoto's Mini D2S 3.0 came out in 2013, it changed the game. When the Mini H1 7.0 launched in 2015, it changed the game. The Mini D2S 4.0 carries on the tradition – and why? Not only does it make the 3.0 look like an old dinosaur...but because it's powered by D2S bulbs; it's capable of taking the awesome optics developed for the H1 7.0 to a whole new level.
OUTPUT: We'll just start with the hotspot. It's brighter than any bi-xenon projector we've tested...in fact, it's so bright that it exceeds the maximum amount of intensity allowed by DOT even at 35W. (because #regulations) The beam pattern is extremely wide and flat, with none of the bowing found on the 3.0...all thanks to the beauty in the center of this beast: it's curved cutoff shield. The Kuria Optic clear lens helps produce plenty of color flicker, but also a razor sharp cutoff line that eliminates all glare to oncoming traffic. Last but not least, the high beam. Shaped by the secondary cutoff shield, there's plenty of light reserved for use here to penetrate for hundreds of meters at night.
PHYSICALLY SPEAKING: Output isn't the only thing the 4.0 gets praise for. It's clear they've paid a lot of attention to the physical attributes too. The threaded shaft is longer than before, making it easier to install, and it's threads are silky smooth (near impossible to strip). The bi-xenon solenoid mechanism has next to no slack, and thankfully this time, the solenoid input actually plug into the back of the projector. The black lens holder gets the cool “4” cut out too! OEM Quality, aftermarket performance. We like it!
APOLLO 1.0: A fully circular shroud with a large overall diameter perfect for filling out reflectors in bigger headlights. Inspired by the Porsche Cayenne Turbo. The Apollo's have a beautiful smooth chrome finish that is accented by textured face for clean, factory-installed finished look.
IN COMPARISON: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.
A OR B: At The Retrofit Source, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a "B stock" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the "A Stock" Shrouds.
MOUNTING: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.
Dynamic Lighting Systems Mini H1 Bi-Xenon Projectors With Labor
When looking at all the different styles and brands of Mini H1 projectors we have done all the R&D to ensure you are provided with the best Mini H1 HID projector system out there! These projectors fit nearly any headlight housing and with the Hub Centric ring add on you can fit a full size 3” shroud to find just the right perfect size shroud to compliment your housings design!
When looking for the best Mini H1 projector on the market with the tightest cut off line and perfect “Hot Spot” these are your solution!
2016+ Toyota Tacoma 3rd Gen drop in sequential LED boards
The first and only of its kind! Hand made in America to provide the highest quality standards on the market with features never before seen! These drop in LED boards provide pure white and amber output with dancing and sequential turn functionality! On top of that we have managed to integrate a NeoPixel feature that allows not only solid color changing features but also over 200 color flowing designs! The best part is the ability to run the White, Amber and Neo features together to create a mind blowing performance! The boards will feature the following features.
- Solid White output for DRL
- Startup and shutdown sequences with the W/A
- Show mode to really set yourself apart from the rest of the crowed
- Sequential turn signal integration with a ultra bright amber output
- Optional NeoPixel integration for solid color changing and color flow sequences all controlled by your phone
- Plug and play harnesses with a revolutionary Potted Ghozt controller for easy install and reliability
-Pair of American made boards designed from the ground up for perfect fitment into the factory DRL board locations
- Tech support for any questions you may have during install
- 1 Year Warranty against any product defects not caused by abuse or improper installation
Dynamic Lighting Systems Mini Beast Bi-Xenon Projectors
When dealing with a very tight space it becomes difficult to find just the right projector to not only fit in the location but also provide a superior lighting upgrade! These Mini Beasts come in 2 different options depending on if you are dealing with a shallow mount location or if you have a little extra depth to work with!
The Mini Beast 1 is the shallowest Bi-Xenon Projector available on the market! Providing a substantial light upgrade and look to the smallest of housings
The Mini Beast 2 is slightly deeper than the Mini Beast 1 but provides better light output and better fitment in some applications where the size of the location is small but still allows for a deeper mounting location!
BI-LED: PROFILE BI-LENS LED
PROFILE PERFORMANCE: The automotive aftermarket’s best name in LED Lighting; and there's no such more powerful and controlled way to light the road than with a set of high performance headlight projectors. While Bi-xenon projectors have been the industry standard for over a decade, new options from both Morimoto and Profile are here to stay. We may be the LED Concepts crew over here, but up until now we thought LED was best suited for the accessories around your headlights, not the headlights themselves. We are confident enough to use the Bi-Lens LED projectors on our own cars, and therefore we're confident enough to recommend them to you.
WELL DONE: The Profile Bi-Lens projector is plenty bright, and we're not talking big blob of uncontrolled light-bar bright. We're talking well-controlled, non-glaring light output for use on the road. Their advanced optics, curved cutoff shield, and CREE XHP35 chipset come together to create a properly distributed and wide beam pattern with a proper ECE style step in the middle. With a factory-installed clear lens, the cutoff like is nice and sharp/colorful.
EASY INSTALL: Despite the fact that there's a bit of extra heft on the back of the projector, their overall size is pretty similar to something like Morimoto's Mini D2S 4.0. Respectably compact enough to fit in most headlights, the Bi-Lens features a threaded-shaft style mount on the back that allows the projectors to be locked on with their included hardware, and minimal modifications to your headlight. If you've been considering a Mini H1 retrofit for the ease of install, these are a comparable option to think about.
SIMPLE: Separate bulbs to buy? Nope. Big ballasts to mount? Nada. Relay harness to run? Not a worry. The Profile Bi-Lens setup is nothing more than the projector itself and the small external LED driver to regulate power. If you dont have the space or simply the patience to deal with all the necessary gear that powers HID-based systems, that's reason enough to look further into going all LED.
CONSTRUCTION: The Profile Bi-Lens LED is a solid start in the LED projector world. The die-cast aluminum body feels heavy duty, and has more than enough surface area to properly cool the LED chip set. The die-cast cutoff shield is done with precision, and the reflector bowls have a perfectly metalized finish. Clarity of the lens is great. We're not so sure they spec'd a Hi/Lo solenoid that looks like a leftover from an old Mini H1, and the wiring/driver could be a bit beefier – but if you can look past the small things; overall it's a well-executed design.
COMPATIBLE: Conveniently, the Profile Bi-Lens LED projector is compatible with most every retrofit bracket on the market that's been designed around the Morimoto Mini D2S 4.0. Since the bolt pattern on the main mounting bracket is shared between the two projectors, if you're looking at something thats made for the Mini, then chances are you're looking at something that's made for the Bi-Lens too. Nice!